|
|
| |
|
Partners
Tel.: (+420) 573 368 336
GSM:(+420) 602 361 487
Fax: (+420) 573 368 300
e-mail: info@iskra-agv.cz
|
| Electronic Controllers |
ISKRA Electronic Controllers
Electronic controllers are mainly designed for battery-supplied electric drive systems based on DC commutator motors, BLPM-brushless permanent magnet motors and AC induction motors. They are designed for use in vehicle drives, pump drives and for some other applications.
The built-in electronic components allow for complete diagnostics of the system and are easy to program through hand console or a personal computer. The structure of all controllers enables fast and easy custom designing and compliance with almost all requirements of the application.
|
| Pump Controller |
ISKRA Electronic Controllers
The pump controller is designed to operate with DC commutator series wound or compound wound pump motors. It is microprocessor controlled and designed to be cost effective and to occupy as small an outline as possible for a given output power.
| »Technical characteristics |
| Supply voltage range: | 13.5 V - 36 V |
| Max.motor current (1min) S3 - 1%: | 320 A |
| Maximum current S3 - 10%: | 250 A |
| Chopping Frequency: | 200..1000 Hz |
| Operating temperature range | -20ºC to +60ºC |
|
| BLPM Controller |
ISKRA Electronic Controllers
The electronic controller for BLPM-brushless permanent magnet motors is suitable for applications that can take advantage of the features obtained from BLPM motor drives. High efficiency, maintenance free and four-quadrant operation are the most typical benefits BLPM system can offer.
| »Technical characteristics |
| Supply voltage range: | 24 V - 80 V |
| Current ratings: | 1min…<200 A (battery current) |
| Operating mode S2: | 60min…<80 A |
| Current limit operating: | 10%/ºC above +80ºC |
| Operating Frequency: | 15 kHz |
| Operating temperature range: | -20ºC to +60ºC |
|
| AC Controller |
ISKRA Electronic Controllers
The Iskra AC controller is designed around a high performance DSP processor, which performs real time flux vector control of an AC induction motor. The result is outstanding motor dynamics and efficiency. Flexible communications and simple electrical connection make this system an ever more attractive choice for traction and hoist applications.
| »Technical characteristics |
| Supply voltage | 24 V | 48 V |
| Ambient Temperature | - 20oC < Tamb < 45oC |
| »Traction Part for AC induction motor |
| Max Phase Current (RMS) 5 sec | 330A - 480 A | 320 A |
| Max Phase Current (RMS) 2 min | 300 A - 450 A | 300 A |
| Operation Mode S2 60 min | 150 A - 175 A | 150 A |
| Operating frequency | 10 kHz |
| »Hydraulic Part for DC commutator motor (Optional) |
| Max. Current (DC) 5 sec | 200 A - 330 A | 370 A |
| Max. Current (DC) 2 min | 180 A - 300 A | 350 A |
| Operation Mode S2 60 min | 100 A - 150 A | 175 A |
| Operating frequency | 10 kHz |
| Download AC controllers.pdf | (PDF document, 627 kB) |
For more information about our products please contact us.
|
|
Iskra Drive Systems - Full Catalogue
|
To view the whole product range of our electric motors and electronic controllers, please download the pdf document.
|
Drive_systems.pdf (567 KB)
|
Here you can download the latest applications in pdf format. In order to open them you need
Adobe Acrobat Reader
|
|
www.rostin.cz |
www.kaminka.cz |
www.dopravni-situace.cz |
www.tigerservis.cz |
generováno programem WebGen.cz